#2 Crushed Stone in New Jersey
On New Jersey sand or glacial till, #2 Crushed Stone provides a washed, open layer for drainage work and construction entrances.
- Size: About 1-1/2 inches to 2-1/2 inches
- Grading: #2, washed with no fines
- Type: Large angular crushed stone
- Supplied as: #2 or the closest local equivalent; we confirm the exact material before delivery
From $445 for 1 ton, delivery included (larger loads cost significantly less per ton)
Free delivery included
Free delivery anywhere in New Jersey
Pick a delivery date
Weekday delivery, earliest Oct 27
Get a Free Quote
Fill out the form and our sales team will get back to you within the hour.
Everything You Need to Know About #2 Crushed Stone
Size and Grading
- Size
- About 1-1/2 inches to 2-1/2 inches
- Grading
- #2, washed with no fines
- Type
- Large angular crushed stone
- Supplied as
- #2 or the closest local equivalent; we confirm the exact material before delivery
Ground conditions change between glacial till near the Highlands and the sandy coastal plain. #2 Crushed Stone is washed, angular, and free of fines, so it stays open instead of becoming a tight surface. That quality is useful around culverts and ditches, as well as at construction entrances where water needs a path through the stone.
Where a driveway or pad needs drainage below its working surface, place this material beneath larger stone rather than using it as a tight top course. The layered approach keeps the open stone in the part of the base where it can move water. It can also be used under lanes and equipment pads when the site calls for a heavy drainage course.
Quickly Calculate How Much You Need
Material: #2 Crushed Stone
How to Measure
Measure the length and width of your project area in feet
Decide on depth in inches (2" for landscaping, 4" for driveways)
Enter the values above and we'll calculate the tonnage you need
Need help figuring out the right amount? We can help!
Call or text us at (973) 832-1936 and we'll help you calculate the right quantity for your project.
Not sure how much you need? The Stone Calculator has depth guides, coverage charts and worked examples for this material.
Common Uses
Site Entrances
Place a deep layer of large angular rock where the site joins the road to help remove mud from tires before trucks leave the property.
Culvert & Ditch Lining
Set heavy stone at culvert ends and through drainage ditches where concentrated runoff can wash material away.
Heavy Base Layers
Set it as the bottom layer for farm lanes, equipment pads, or weak ground, then place finer stone above it.
Drainage Courses
Its open structure lets high volumes of water pass through and move away from the project area.
Why Choose #2 Crushed Stone
Holds Position
The large, weighty pieces help limit ruts and stay in place under vehicle traffic.
Rapid Drainage
Washed stone without fines leaves broad openings for water flow.
Supports Weak Ground
Large angular rock distributes weight over wet or unstable subgrade.
Low Maintenance
After installation, it usually needs only an occasional addition of material.
