Skip to main content
FREE Delivery!|(973) 832-1936

Cumberland County, New Jersey ยท Free Delivery

Bulk Gravel Delivery to Greenwich, NJ

Free delivery to Greenwich on every order, with loads arriving in as fast as 2 business days.

Delivering to Greenwich, NJ

Free delivery on every order.

  • Free delivery to Greenwich
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Greenwich

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Greenwich

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Greenwich

Decorative delivered to Greenwich

Rounded stone for beds, borders and water features.

Sand delivered to Greenwich

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Greenwich

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Greenwich

How delivery to Greenwich works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Greenwich.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Greenwich addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Order gravel and aggregate delivery in Greenwich, NJ without leaving the house. New Jersey Rock Supply sells bulk material online by the ton or the yard, then drops it where you need it. Start with quarry process, the standard New Jersey base blend. Sandy ground here drains fast, so the base you build sets the life of the patio.

Materials for Greenwich Projects

Pavers and flatwork in Greenwich stay level only when the bed under them is right. Build the wrong bed and the surface rocks, dips and shifts within a season. Build it right and it stays flat for years.

Quarry process, also called QP or 3/4 inch QP, is the dense graded base for patios, walkways and driveway pads. It packs hard because it blends 3/4 inch stone down to stone dust. Order it as QP (Quarry Process) and compact it in lifts before anything else goes down.

Stone dust, also called screenings, is the setting bed. Spread roughly an inch over the compacted QP, screed it flat, then set pavers or flagstone. It locks tight and holds joints. Order Stone Dust for the bed and the joint fill.

Washed sand, also called concrete sand, levels and beds slab work and paver areas that want a looser bed. Mason sand, also called masonry sand, suits brick, block and tighter joints. Order Washed Sand or Mason Sand.

Finish the edges and joints with finer washed stone. Natural Pea Gravel sits well in patio borders and walkways, and #8 stone fills tight paver joints. Order Natural Pea Gravel or #8 Crushed Stone.

Ground and Conditions in Greenwich

Deep, loose sand drains fast here. That sounds helpful, and it mostly is. It also means a thin base shows its flaws quickly: pavers rock, edges sink, joints open after a wet winter.

Fix it with depth and compaction. Excavate enough so the QP base finishes as a solid compacted layer, then compact it in lifts with water. On low ground near the bay and marsh, where the water table sits close to the surface, add a drainage layer of clean stone under the base so water has somewhere to go.

Loose sand also washes out of unpaved drives, ditches and bare slopes in a downpour. Line those runs with Drain Rock or RipRap to slow the water before it cuts a channel.

Lighter freeze-thaw and milder winters near the ocean let you work sandy ground through much of the season. The hold-ups are coastal storm tides and saturated low ground, with coastal storms most frequent from October to April. Under the NJ residential code, frost depth is 2 ft 6 in.

Delivery to Greenwich and the Surrounding Area

Choose your unit first. Sold by the ton, weight is exact and easy to compare. Sold by the yard, volume is easier to match to a hole you already measured. Know your area and depth, then convert.

Estimate quantity this way: length times width times depth in feet, divided by 27, gives cubic yards. For a dense base like QP, let the calculator convert those yards into tons. Add a little for compaction and spillage.

New Jersey Rock Supply delivers bulk loads across Cumberland County, including Vineland, Millville, Bridgeton, Port Norris and Newport. Spot the truck where it can reach the work and dump clear of the excavation.

Questions About Greenwich Aggregate Orders

What gravel is best for a driveway in Greenwich?

Quarry process is the right base for most Greenwich drives. It compacts hard and binds because it carries stone dust through the blend. Top it with 3/4 inch trap rock or driveway gravel for a clean wearing surface, or leave the QP exposed and rolled. On wet, low ground, put clean stone underneath for drainage first.

How much material will my project need?

Measure the area and decide your finished depth. Enter the area and depth in the calculator to get tons or yards for a dense base. A patio base needs more material than a thinner walkway layer. Round up, since compaction settles the material.

Size Your Load and Place the Order

Measure the area, set your depth, and let the calculator turn it into tons or yards. Then order quarry process, stone dust and your finishing stone online. New Jersey Rock Supply delivers bulk material across Greenwich and Cumberland County, sized to your project. Place your order and get the base right the first time.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Greenwich, NJ

What gravel is best for a driveway in Greenwich?

Quarry process is the right base for most Greenwich drives. It compacts hard and binds because it carries stone dust through the blend. Top it with 3/4 inch trap rock or driveway gravel for a clean wearing surface, or leave the QP exposed and rolled. On wet, low ground, put clean stone underneath for drainage first.

How much material will my project need?

Measure the area and decide your finished depth. Enter the area and depth in the calculator to get tons or yards for a dense base. A patio base needs more material than a thinner walkway layer. Round up, since compaction settles the material.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.