Bulk Aggregates for Pathways in Mount Holly, NJ

If you are building a garden path or setting a walkway through the yard, New Jersey Rock Supply handles gravel and aggregate delivery in Mount Holly, NJ. The material that starts most jobs here is quarry process, the 3/4 inch blend that packs down hard. This ground is layered sand, silt and clay, so it holds water longer than the sandier soils southeast of us.

A path is mostly a base problem. Get the base right and the fines on top stay put.

Materials for Mount Holly Projects

Path and walkway work lives on fines and screenings. The base carries the load; the fines lock it up and give you something walkable. Most Mount Holly paths start with a compacted layer of QP (Quarry Process), also called dga or dense graded aggregate, and finish with a finer material on top.

For the setting bed, Stone Dust is the usual New Jersey choice. Screened stone dust packs firm under pavers and flagstone, and it fills the joints once you sweep it in.

For the walking surface itself, Walkway Gravel is graded for a finer, more walkable finish than a driveway mix. If you want a softer look, Natural Pea Gravel at roughly 3/8 inch works well for paths, patio borders and play areas.

Where a path meets wet ground, put #57 Stone underneath. Clean 3/4 inch stone lets water move instead of sitting in the base.

Ground and Conditions in Mount Holly

The failure you see on a thin path base here is edge breakdown. The ground is flat in a lot of spots, and the clay layers in this soil slow drainage after a downpour. Water sits in the base, the edges soften, and the path ruts under a wheelbarrow.

Soft, wet ground here calls for a deeper base and a path for water, not a heavier topping. Open the subgrade, compact the quarry process in lifts, and give the water somewhere to go. Stone dust on top of a shallow base will not save it.

Winter is mild compared to the northern hills, but freeze-thaw still runs every year, and frost depth under the residential code in Burlington County is 2 ft 6 in. Base work slows in mid-winter and after long wet spells. Riprap is the answer where runoff scours a creek bank or a bare slope.

Delivery to Mount Holly and the Surrounding Area

Ordering online comes down to one choice: tons or cubic yards. Sold by the ton, you are buying weight for base and drainage work. Sold by the yard, you are buying volume for fill, soil and mulch. Pick the one that matches how you measured, and the quantity falls into place.

To estimate, take your length times width times depth in feet, then divide by 27 for cubic yards. For a path, work in a thin surface layer over a thicker compacted base.

Bulk delivery drops the load where the truck can reach, so have the path route cleared and the pile spot marked. We deliver across Mount Holly and Burlington County, including Mount Laurel, Willingboro, Medford, Moorestown and Maple Shade.

Questions Mount Holly Buyers Ask

What should I have ready when the truck arrives?

Clear the driveway or the route the truck will use, and mark where you want the pile so it does not block the path you are building. A tarp is worth having if rain is coming. If the ground is soft from a wet spell, tell us ahead of time so the driver can plan the approach.

What is the best base under pavers in Mount Holly?

Quarry process is the standard here. It is a blend of crushed stone down to stone dust that compacts into a hard, binding base, placed as a solid layer and compacted in lifts. Stone dust goes over it as the setting bed at about an inch, which is how most New Jersey installers build a paver walkway.

Get Your Path Materials Figured Out

Run your path dimensions through the quantity calculator and it will tell you the tons or yards you need for base, bedding and surface. New Jersey Rock Supply delivers quarry process, stone dust and walkway gravel to Mount Holly and the rest of Burlington County. Set your quantities and place the order when you are ready.